高压电容器

Quote within 6 hours · radial-lead ceramic typically 3–4 weeks · fast screw-terminal ranges about 1 month.

HVC manufactures high voltage capacitors from 1 kV to 150 kV: radial-lead ceramic discs, screw-terminal doorknob capacitors, metallized polypropylene film and safety-certified AC parts. Ceramic components use N4700 Class I or Y5T Class II dielectric and are screened to partial discharge ≤ 5 pC at rated voltage.

Choosing a high voltage capacitor starts with three questions: what voltage stands across it in service, how much capacitance the circuit needs, and how much capacitance drift the design can tolerate. Everything else — package, mounting, dielectric, termination — follows from those three. This page maps the families HVC makes onto those questions, then links to the detailed specification pages.

The three families at a glance

家庭电压电容量电介质安装
Radial-lead ceramic disc1 kV – 50 kV catalogue, 70 kV to drawing10 pF – 33,000 pFN4700, Y5T, Y5P, Y5U, Y5V, SLRadial leads, 5–20 mm spacing
螺丝端子门把手10 kV – 150 kV100 pF – 30,000 pFN4700, Y5T, Y5VM4 / M5 / 8-32 UNC stud
金属化聚丙烯薄膜700 – 3000 伏直流0.0068 – 5.6 µFSelf-healing PP filmRadial, PCB mount
Safety certified AC250 – 760 伏交流电100 pF – 1 µFY5P, Y5U, Y5VX1/Y1, X2/Y2 radial

High voltage resistors and rectifier diodes for the same circuits are on separate pages: thick film resistors 和 整流二极管.

Class I or Class II dielectric

This is the decision that most often goes wrong. Class I (N4700) holds its capacitance across temperature and voltage; Class II (Y5T, Y5P, Y5U, Y5V) packs more capacitance into the same body but drifts.

电介质增益级Drift over −30 to +85 °C它属于哪里?
N4700I类Defined negative coefficient, stableX-ray and CT tanks, laser PFN, snubbers, RF, HVDC valve positions
Y5PII类±10%General HV filtering, coupling
Y5TII类+22% / -33%Cost-sensitive HV filtering and multipliers
Y5U / Y5VII类+22% / −56% to −82%Non-critical decoupling where size dominates

If the circuit is a snubber, a pulse-forming network, a resonator or a voltage divider, drift changes the circuit behaviour and Class I is the only safe choice. If it is bulk filtering where a ±30% shift does not matter, Class II gives you the capacitance in a smaller body. The N4700 与 Y5T 对比 works through the numbers.

Selection by application

应用领域典型规格从这里开始
Medical X-ray and CT high voltage tanks20–80 kV, N4700, PD ≤ 5 pC, oil immersed医学影像解决方案
Pulsed laser and PFN discharge10–50 kV, high dV/dt, low ESLPulsed power solutions
HVDC and VSC converter valves10–150 kV screw terminal, grading and snubber dutyHVDC valve capacitors
NDT and inspection X-ray30–100 kV, low ripple, stable capacitancePrecision inspection solutions
IGBT snubber and DC link700–3000 Vdc, self-healing film薄膜电容器
AC line filtering and safetyX1/Y1, X2/Y2 rated to IEC 60384-14Safety capacitors

Every voltage class, specified

Each rating below has its own specification page with the full part-number table, capacitance range, dielectric options, stud or lead dimensions. Use it to pick the exact value rather than browsing the catalogue.

电压Radial-lead ceramic disc螺丝端子门把手
1 kV – 8 kV1 kV–8 kV disc specification -
10千伏10 kV disc specification -
15千伏15 kV disc specification -
20千伏20 kV disc specification20 kV doorknob specification
30千伏30 kV disc specification30 kV doorknob specification
40千伏40 kV disc specification40 kV doorknob specification
50千伏50 kV disc specification50 kV doorknob specification
70 kV – 100 kVDisc range to 50 kV; higher ratings built to drawing70–100 kV doorknob specification
150千伏 - Screw-terminal, 800 pF, built to drawing — full doorknob range

Lead time by product family

家庭典型日程安排What confirms the date
Radial-lead ceramic discs通常3-4周Voltage, capacitance, dielectric, lead spacing, quantity and destination
Screw-terminal doorknob capacitorsFast catalogue ranges can be about 1 monthVoltage, capacitance, disc construction, stud, quantity and delivery location
Film and safety-certified AC capacitorsConfirmed by the selected seriesPart number, certification requirement, quantity and destination

These are normal planning ranges, not a promise of immediate stock. Custom voltage, capacitance, stud, insulation, coating, drawing or qualification requirements require a separate date confirmation after RFQ.

What the datasheet has to state

Four figures decide whether a high voltage capacitor survives. Ask for all four on any quotation, from any supplier:

Replacing a discontinued high voltage capacitor

Most of the high voltage capacitors in service today were designed in when a catalogue part existed. When Murata, TDK or Vishay ends a series, the board does not change — the capacitor has to fit the same footprint and mounting. HVC builds to the original drawing and publishes a cross-reference table with the offer. Send the original part number, the drawing or the datasheet page; the capacitor cross-reference index covers the Murata, TDK, Vishay and AVX programs already mapped.

常见问题

What is the highest voltage available?

150 kV DC in screw-terminal ceramic. Above that, series stacks are built to drawing; the mechanical envelope becomes the limiting factor rather than the ceramic.

How much should I derate a high voltage capacitor?

For continuous DC duty, 50% to 70% of rated voltage is the working range most designs use. For repetitive pulse duty the limit is dV/dt and self-heating, not the DC rating — ask for the pulse data on the specific part.

Ceramic or film for a high voltage application?

Ceramic wins above roughly 10 kV and wherever the package must be small or the part must survive high temperature. Film wins where self-healing matters, where microfarads are needed, or where the pulse energy is large at a few kilovolts.

Do you supply single units and small lots?

Yes. Prototype and laboratory quantities are quoted the same way as production orders, with the partial-discharge record per unit.

交货时间是多少?

Standard ceramic ranges ship in 4 to 6 weeks; rectifier stacks and catalogue screw-terminal parts in 2 weeks. Quotations are returned within 6 hours.

Specifying a high voltage capacitor?

Send the working voltage, capacitance, dielectric class, package envelope and annual quantity. HVC replies with a matched part number, partial-discharge data and a 6-hour quotation.

请求技术报价 →