工程计算器
Capacitor Energy and Peak Current Calculator
如何读懂图表。 Closing the switch dumps the stored charge through the load resistor. Peak current is set by V / R at the instant of closure and then decays as e−t/RC, which is the pulse drawn on the right.
Stored energy decides whether a pulse is safe and whether the capacitor survives it. Enter capacitance, voltage and the discharge resistance to get energy, charge and peak current.
输入
功能验证
- 储能
- -
- 收费
- -
- 峰值电流
- -
- 时间常数
- -
其计算公式
E = ½ × C × V². Charge Q = C × V. Peak discharge current I = V / R at the instant the circuit closes, decaying with τ = R × C.
计算器不包含的内容
- 脉冲持续时间。 Peak current lasts microseconds in a low-resistance loop. The capacitor must be rated for that dV/dt, not only for the energy.
- 重复。 A pulse that is safe once can overheat at 100 Hz. Ask for pulse data on the specific part.
- 介电吸收。 After discharge the capacitor recovers part of its voltage, which is why bleeder design matters.
Choosing the parts
Pulse and PFN duty usually calls for N4700 Class 1 in a radial disc 或者 screw-terminal doorknob. Class 2 drift makes those parts a poor fit for repeated pulses.
Send the calculated values and the duty: 索取技术报价6小时内回复。