High Voltage Engineering Calculators
Six calculators we use when specifying divider, discharge, pulse and multiplier positions, plus a part number decoder. All work in volts, ohms, farads and seconds, so 100 kV and 100 pF go in without unit conversion.
计算器Resistive voltage dividerOutput voltage, division ratio and total dissipation for a two-resistor divider from 1 kV to 150 kV.计算器Bleeder resistor and discharge timeTime to discharge a capacitor to a safe voltage, or the bleeder resistance needed to reach it within a target time.计算器Capacitor energy and peak currentStored energy, charge and peak discharge current for a pulse.计算器Series capacitors and balancingVoltage split per unit and the balancing resistor that holds it.计算器考克罗夫特-沃尔顿乘数No-load output, voltage drop and ripple for a cascade.计算器VCR divider errorWhat voltage coefficient does to a divider ratio at 20 kV.Lookup toolHVC part number decoderPaste an HVC disc, doorknob or resistor number and get voltage, dielectric, capacitance, tolerance and body size back.
What these tools are for
Divider and bleeder positions are where high voltage resistors are most often specified, and where the arithmetic is most often done by hand. A divider calculated only by ratio ignores the voltage coefficient of the resistors; a bleeder calculated only by resistance ignores the stored energy and the discharge curve. The calculators give the numbers, and each page states what the number does not cover.
Related specification pages
- High voltage resistors overview — planar, tube and power bar form factors.
- Planar thick film resistors — the usual choice for a divider.
- High voltage capacitors overview — what the bleeder is discharging.
Have the numbers, need the part?
Send the resistance, voltage and tolerance the calculator produced. HVC replies with a matched part number and a 6-hour quotation.
请求技术报价 →